Aanbeveling van kundige adviseur
- Rekening Lavarage 1:500
- Bate : EURUSD, GPBUSD , AUDUSD
- TF : 30M
- Min deposito : 500USD
- Handelsure : 24/7
Mense wat sterk aanbeveel word
Good Monday EA Description
The Expert Advisor trades when the market opens after the weekend, focusing on the emerging price gap ( gap ). The already developed sets are in the comments. At the same time, various parameters are available in the expert settings, allowing you to create your own unique sets yourself.
Currency pairs for which the sets have been developed: GBPUSD, AUDUSD, NZDUSD, USDCAD, EURGBP, EURCHF, GBPCAD, GBPAUD, AUDCHF, AUDJPY, AUDNZD, CHFJPY, CADJPY, NZDJPY, NZDCHF, EURUSD, GBPCHF, GBPJPY.
The optimization of the sets was carried out in the MetaTrader5 strategy tester, as there quotes have a floating spread, which makes testing more reliable.
The EA works the same on any timeframe, since it itself takes the necessary data from several timeframes
==== Lot and MM ====
Use_Fix_Lots – enable / disable a fixed lot when trading;
Value_fixed_Lot – fixed lot size;
Use_MM – enable / disable the lot size based on the balance;
Funds_for_001_Lot – amount of funds for 0.01 baie;
Use_MM_Reg – enable / disable restoring money management (the trading lot will not decrease in case of drawdowns);
Funds_for_001_Lot_Reg – amount of funds for 0.01 baie;
==== Comment_and_Magic ====
Magic – a unique number of the expert’s deals;
Comment – comment of the expert’s deals;
==== GAP_at_Monday ====
Min_GAP_at_Monday – the minimum gap size at which it is allowed to open positions;
Max_GAP_at_Monday – the maximum gap size at which it is allowed to open positions;
Position_against_GAP – if true, then open positions against the gap; if false, then open positions in the continuation of the gap;
Start_from_GAP_in_minute – after what minute is it allowed to open positions, counting from the gap;
Period_for_Open_in_minute – the number of minutes during which it is allowed to open positions;
==== Common parameters ====
BUY_orders – open buy positions;
SELL_orders – open sell positions;
Slippage – allowable slippage in points (does not affect the market execution);
Max_Spread_Open_for_BUY – the maximum allowable spread in points for opening a buy trade;
Max_Spread_Open_for_SELL – maximum allowable spread in points for opening a sell trade;
Max_Spread_Close_for_BUY – the maximum allowable spread in points for closing a buy trade;
Max_Spread_Close_for_SELL – maximum allowable spread in points for closing a sell trade;
Close_for_Any_Spread_at_Pips_Profit – the number of points in profit (taking into account the current spread), at which an order can be closed (with a signal to close) at any spread, if the value is greater than 0;
Pause_at_Open – pause in opening positions;
==== Duration of the open position ====
Number_Minutes_and_Closing_Max_Bar – the number of minutes after which the position will be closed if the price is the highest since the opening of the position (as 0 is invalid);
Only_Profit_Position_for_Closing_Max_Bar – close a position by ” Number_Minutes_and_Closing_Max_Bar ” only if the position is in profit;
Number_Minutes_and_Closing_Medium_Bar – the number of minutes after which the position will be closed if the price is not lower than the average value from the moment the position was opened (as 0 is invalid);
Only_Profit_Position_for_Closing_Medium_Bar – close a position by ” Number_Minutes_and_Closing_Medium_Bar ” only if the position is in profit;
Number_Minutes_and_Closing_Profit – the number of minutes after which the position will be closed if it is in profit (as 0 is not valid);
Max_Minutes_Open_Position – the number of minutes after which the position will be closed (as 0 is invalid);
Minimum_Pips_at_Profit – the minimum number of profit points to close a positive trade;
==== SL_and_TP ====
Use_Hide_TP_SL – if “true”, then virtual (hidden from the broker) TP and SL are used instead of real ones.
TP_Real_from_GAP – multiplier for calculating take profit from the size of the gap (as 0, then TP is absent);
Min_TP – the minimum limit for the calculated take profit in points (as 0 is invalid);
Max_TP – the maximum limit for the calculated take profit in points (as 0 is invalid);
SL_Real_from_GAP – multiplier for calculating stop loss from the size of the gap (as 0, then there is no SL);
Min_SL – the minimum limit for the calculated stop loss in points (as 0 is invalid);
Max_SL – maximum limit for the calculated stop loss in points (by 0 it is invalid );
==== Oscillator filter ====
use_Oscillator_filter – enable / disable Oscillator filter;
Entrance_level – filter level for opening positions (from 0 aan 10);
Exit_level – filter level for closing positions (from 0 aan 10);
==== Grid and Martingale ====
Use_Grid_mode – on / off the “Grid and Martingale” mode;
Multiplier_of_trade_Lot – multiplier for a trading lot when opening a new position in the position grid;
Min_minuts_pause_between_positions – minimum pause in minutes between opening positions;
Multiplier_of_Min_minuts_pause – multiplier for Min_minuts_pause_between_positions when opening the next position;
Min_pips_between_positions – the minimum difference in open prices in points required to open a new position;
Multiplier_of_Min_pips_between_positions – multiplier for Min_pips_between_positions when opening the next position;
Total_open_transactions – the maximum number of simultaneously open positions;
==== Trailing Stop ====
Breakeven_Start – the required number of points from the position opening price to set a breakeven (not set at 0);
Breakeven_Plus – increase in breakeven by the number of points;
Trailing_Stop – trailing stop value (not set at 0);
Trailing_Step – trailing stop step;
Trailing_Start – the required number of points from the position opening price to set a trailing stop;
Duration_minutes_after_open – the required number of minutes after opening a position to place a trailing stop;
==== Trailing by SAR ====
Trailing_by_SAR – enable / disable trailing for the SAR indicator;
TimeFrame_for_SAR – Timeframe for the SAR indicator;
SAR_at_Profit – use SAR trailing only in a profitable zone;
==== Days without Trade ====
Use_Holidays_Pass – do not trade during the holiday period, which is set using the parameters: Month_start_Holidays, Day_start_Holidays, Month_end_Holidays, Day_end_Holidays;
use_Date_Holidays – do not trade on holidays specified in the Date_Holidays line;
==== to note jumps of spread on a chart ====
note_jumps_of_spread – during the period of opening positions, mark the number of ticks with a spread that is greater than the one specified in the parameters on the chart ( more_than_spread_1 , more_than_spread_2 , more_than_spread_3 );
==== Record of deals in the file ====
Record_Deals – enable / disable writing the details of the Expert Advisor to a file;
Name_File – file name for recording;
Use_Fix_Lots – enable / disable a fixed lot when trading;
Value_fixed_Lot – fixed lot size;
Use_MM – enable / disable the lot size based on the balance;
Funds_for_001_Lot – amount of funds for 0.01 baie;
Use_MM_Reg – enable / disable restoring money management (the trading lot will not decrease in case of drawdowns);
Funds_for_001_Lot_Reg – amount of funds for 0.01 baie;
==== Comment_and_Magic ====
Magic – a unique number of the expert’s deals;
Comment – comment of the expert’s deals;
==== GAP_at_Monday ====
Min_GAP_at_Monday – the minimum gap size at which it is allowed to open positions;
Max_GAP_at_Monday – the maximum gap size at which it is allowed to open positions;
Position_against_GAP – if true, then open positions against the gap; if false, then open positions in the continuation of the gap;
Start_from_GAP_in_minute – after what minute is it allowed to open positions, counting from the gap;
Period_for_Open_in_minute – the number of minutes during which it is allowed to open positions;
==== Common parameters ====
BUY_orders – open buy positions;
SELL_orders – open sell positions;
Slippage – allowable slippage in points (does not affect the market execution);
Max_Spread_Open_for_BUY – the maximum allowable spread in points for opening a buy trade;
Max_Spread_Open_for_SELL – maximum allowable spread in points for opening a sell trade;
Max_Spread_Close_for_BUY – the maximum allowable spread in points for closing a buy trade;
Max_Spread_Close_for_SELL – maximum allowable spread in points for closing a sell trade;
Close_for_Any_Spread_at_Pips_Profit – the number of points in profit (taking into account the current spread), at which an order can be closed (with a signal to close) at any spread, if the value is greater than 0;
Pause_at_Open – pause in opening positions;
==== Duration of the open position ====
Number_Minutes_and_Closing_Max_Bar – the number of minutes after which the position will be closed if the price is the highest since the opening of the position (as 0 is invalid);
Only_Profit_Position_for_Closing_Max_Bar – close a position by ” Number_Minutes_and_Closing_Max_Bar ” only if the position is in profit;
Number_Minutes_and_Closing_Medium_Bar – the number of minutes after which the position will be closed if the price is not lower than the average value from the moment the position was opened (as 0 is invalid);
Only_Profit_Position_for_Closing_Medium_Bar – close a position by ” Number_Minutes_and_Closing_Medium_Bar ” only if the position is in profit;
Number_Minutes_and_Closing_Profit – the number of minutes after which the position will be closed if it is in profit (as 0 is not valid);
Max_Minutes_Open_Position – the number of minutes after which the position will be closed (as 0 is invalid);
Minimum_Pips_at_Profit – the minimum number of profit points to close a positive trade;
==== SL_and_TP ====
Use_Hide_TP_SL – if “true”, then virtual (hidden from the broker) TP and SL are used instead of real ones.
TP_Real_from_GAP – multiplier for calculating take profit from the size of the gap (as 0, then TP is absent);
Min_TP – the minimum limit for the calculated take profit in points (as 0 is invalid);
Max_TP – the maximum limit for the calculated take profit in points (as 0 is invalid);
SL_Real_from_GAP – multiplier for calculating stop loss from the size of the gap (as 0, then there is no SL);
Min_SL – the minimum limit for the calculated stop loss in points (as 0 is invalid);
Max_SL – maximum limit for the calculated stop loss in points (by 0 it is invalid );
==== Oscillator filter ====
use_Oscillator_filter – enable / disable Oscillator filter;
Entrance_level – filter level for opening positions (from 0 aan 10);
Exit_level – filter level for closing positions (from 0 aan 10);
==== Grid and Martingale ====
Use_Grid_mode – on / off the “Grid and Martingale” mode;
Multiplier_of_trade_Lot – multiplier for a trading lot when opening a new position in the position grid;
Min_minuts_pause_between_positions – minimum pause in minutes between opening positions;
Multiplier_of_Min_minuts_pause – multiplier for Min_minuts_pause_between_positions when opening the next position;
Min_pips_between_positions – the minimum difference in open prices in points required to open a new position;
Multiplier_of_Min_pips_between_positions – multiplier for Min_pips_between_positions when opening the next position;
Total_open_transactions – the maximum number of simultaneously open positions;
==== Trailing Stop ====
Breakeven_Start – the required number of points from the position opening price to set a breakeven (not set at 0);
Breakeven_Plus – increase in breakeven by the number of points;
Trailing_Stop – trailing stop value (not set at 0);
Trailing_Step – trailing stop step;
Trailing_Start – the required number of points from the position opening price to set a trailing stop;
Duration_minutes_after_open – the required number of minutes after opening a position to place a trailing stop;
==== Trailing by SAR ====
Trailing_by_SAR – enable / disable trailing for the SAR indicator;
TimeFrame_for_SAR – Timeframe for the SAR indicator;
SAR_at_Profit – use SAR trailing only in a profitable zone;
==== Days without Trade ====
Use_Holidays_Pass – do not trade during the holiday period, which is set using the parameters: Month_start_Holidays, Day_start_Holidays, Month_end_Holidays, Day_end_Holidays;
use_Date_Holidays – do not trade on holidays specified in the Date_Holidays line;
==== to note jumps of spread on a chart ====
note_jumps_of_spread – during the period of opening positions, mark the number of ticks with a spread that is greater than the one specified in the parameters on the chart ( more_than_spread_1 , more_than_spread_2 , more_than_spread_3 );
==== Record of deals in the file ====
Record_Deals – enable / disable writing the details of the Expert Advisor to a file;
Name_File – file name for recording;
Good Monday EA Setting
Good Monday EA Back-test Result
Premium Ondersteuning
Soek jy Premium-ondersteuning vir EA-installasie of -optimalisering ? Ja ons is hier om jou te help.
verbind met ons
Mense wat sterk aanbeveel word
Deel op facebook
Facebook
Deel op twitter
Twitter
Deel op interessantheid
Pinterest
Deel op skype
Skype
Deel op telegram
Telegram
